润滑脂推荐/ Lubricant Recommendations

<aside> 💡

钢丝+润假轴孔洞：质地较粘稠的润滑脂，如 xht-bdz、hvg 等

Stabilizer wires + stabilizer insert holes: Use a thick/viscous grease (e.g., XHT-BDZ, HVG, etc.). 卫星轴其它部位：质地较稀的润滑脂，如 205g0、3204 等

Other stabilizer parts: Use a thin/light grease (e.g., GPL205G0, 3204, etc.).

</aside>

润钢丝/Lubricating the Stabilizer Wires

使用 xht-bdz 厚润钢丝末端和拐角 Apply XHT-BDZ generously to the ends and bends of the stabilizer wire.

润假轴/Lubricating Stabilizer Inserts

使用 xht-bdz 厚润假轴孔洞 Apply XHT-BDZ generously to the holes of the stabilizer insert.

使用 xht-bdz 厚润假轴孔洞 Apply XHT-BDZ generously to the holes of the stabilizer insert.

使用205g0厚润假轴前后外壁 Apply 205G0 generously to the front/back outer walls of the stabilizer insert.

润轴座/Lubricating Stabilizer Housings

使用205g0厚润轴座前后内壁 Apply 205G0 generously to the front/back inner walls of the stabilizer housing.

良好润滑效果示例/Example of Proper Lubrication

1. 假轴孔洞和钢丝末端被润滑脂充分包裹/ Stabilizer insert holes and wire ends are fully coated with grease.
2. 钢丝在轴座转动位置有轻微润滑/ Stabilizer wire has light lubrication at the rotation points of the housing.

空格轴体处理建议/Spacebar Switch Treatment Recommendations

<aside> 💡

如果用户觉得空格手感过于干脆、声音尖锐等情况，可以考虑厚润空格轴心改善

If the spacebar feels overly stiff or produces a high-pitched sound, consider applying grease generously to the spacebar switch stem to improve its feel.

</aside>

日常维护/Daily Maintenance

<aside> 💡

日常使用杂音变多后，可使用夹轴器将轴心提起后，使用注射器往小轴孔洞内注射少量润滑脂（xht-bdz） If rattling increases during daily use, lift the switch stem and Inject a small amount of grease (e.g., XHT-BDZ) into the stabilizer insert holes using a syringe.

</aside>